support +31 85 7607 220 downloads nl en de fr it Esdec USA >
1GWp
already installed
on our systems

ClickFit folded seam roofs

Long strip roofs are predominantly found in more luxurious homes and utility buildings. There are different types of standing seam roofs, such as a single strip, double strip and Kalzip roofs. Standing seam roofs are recognizable by their distinctive raised edges. The materials that standing seam roofs are made of also vary. Common materials are zinc, alu-zinc, aluminium and copper. It is possible to place solar panels on every standing seam roof by using the ClickFit system.

Assembly

The ClickFit system is attached to the roof by means of standing seam or Kalzip clamps. The clamps are attached to the standing seam (raised edge).

The mounting rail gets screwed onto the standing seam clamps. Because standing seam roofs can significantly expand and contract because of changes in temperature, it is recommended not to make the solar panel areas too big in order to avoid any damages to the roof.

The solar panels are hung onto the mounting rail by using the installation aid, so that the solar panels can be easily slid into the right place. The solar panels are subsequently screwed onto the mounting rail by means of the mounting screws and universal clamps. There is already a special screw thread in the mounting rail that simplifies the screwing in of the solar panels. Materials and tools: The ClickFit assembly system is suitable for all brands and types of solar panels. The system is made of durable and high quality aluminium and stainless steel components.

There are special black clamps and caps for black solar panels that are placed over the assembly profile and the mounting screws. This gives the solar panels and the assembly system a complete black finish.

There is only a 10 mm socket wrench needed for the assembly of the solar panels.

Calculation

Every roof is different. As a customer, you can rely on our knowledge and expertise. Our experienced staff can provide you with the necessary advice and support. We are happy to help you calculate the materials required for your project.

By using our ClickFit calculator, you can easily calculate yourself what materials you need and you can be sure you are using the right materials for every situation. The ClickFit calculator is only available for the professional installer.

If you want to use the ClickFit calculator, but have no password, then request this from us via the contact page.

Guaranteed that it's good!

The ClickFit system for slate roofs has been extensively tested and is certified by BDA/KIWA and complies fully with the applicable standards, such as the NVN 7250 and the Dutch Building Decree. The ClickFit assembly system comes standard with a 20 years guarantee. The quality of the system is thus guaranteed and it offers the security that is needed.

The advantages
of our systems

Super quick installation 20 years’ warranty on our productsOutstanding service and advice 100% Dutch product

Calculate
your project

Downloads

Manuals, datasheets en certificates
Esdec BV |Disclaimer | Terms and conditions | Actilus webdesign